Leave feedback on the product
Balancer belt black 83.8cm / width 1.4cm (6 humps, 5 grooves)
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Product code: W-PASE-0014
Share the product card
Ask about the product
The personal data controller is Graf-Art Sławomir Kulbida. We process it to respond to the inquiry. More information about the processing of personal data can be found in the privacy policy.
Black balancer belt 83.8 cm / 1.4 cm wide (6 ribs, 5 grooves)
Robust black drive belt for wheel balancers, designed for precise transmission between the motor and the balancer shaft. Thanks to its dimensions and profile with 6 ribs and 5 grooves, it ensures stable, quiet running of the machine and reliable belt guidance even during prolonged use.
The ideal replacement for worn belts in wheel balancers - a good choice for tyre repair shops, tyre service workshops and vehicle service stations that place a premium on reliability and repeatability of the balancing measurement.
Key features
- Overall length: approx. 83.8 cm (835-840 mm - short belt class for wheel balancers)
- Width: approx. 1.4 cm - universal width for compact balancer drives
- Profile: 6 ribs / 5 grooves - multi-rib drive belt for good contact with the pulley
- Colour: black
- Type: drive belt / multi-ribbed V-belt for wheel balancers
- Materials: tough technical rubber with fibre reinforcement for increased tensile and crack resistance
- Suitable for continuous use in workshop conditions
- Resistant to abrasion, slippage and temperature fluctuations typical of wheel balancers
Application
The belt is designed for driving wheel balancers, where it connects the motor to the balancing shaft (drum). Similar belts are used in popular wheel balancer models from many manufacturers - as part of the drive transmission from the motor to the shaft, responsible for stable rotation of the wheel during measurement.
Different brands of balancers may have different belt lengths (e.g. 86 cm, 93 cm, 96 cm, 99 cm, 850-870 mm), so be sure to measure your old belt or check the specifications of your machine before purchasing.
Why replace a belt?
- A worn or cracked belt can cause uneven balancer operation, slippage and erroneous balancing results.
- A new belt reduces vibration and noise, improving operator comfort.
- An efficient drive means less strain on the motor and electronics of the balancer, extending the service life of the entire machine.
How do I choose a belt for my balancer?
- Compare the overall length of the belt (measured circumferentially) with the old component.
- Check the width and the number of ribs/grooves and compare them with the pulley on your machine.
- If in doubt, consult our service department with the balancer model and the dimensions of the old belt.
If you are looking for a long-lasting, dimensionally correct drive belt for your wheel balancer, this 83.8 cm long, 1.4 cm wide model with 6 ribs and 5 grooves is the perfect choice - it will quickly restore your machine's efficiency and provide repeatable, accurate wheel balancing.
Product safety
Responsible person in the EU
Graf-Art Sławomir Kulbida
ul. Bolesława Chrobrego 38/5
59-700 Bolesławiec, Poland
Importer
LIVRE RAPIDEMENT SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ
Osiedle Mieszka I-go 4/46
26-340 Drzewica, Poland
Opinions
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
It pairs well
Do you need help?
Go to the blog.
Talk to our customer service team.
Monday to Friday from 9:00 AM to 3:00 PM.
Frequently Asked Questions
What cables do I need for my two-post lift?
Check the rope termination. If there are any markings on it, the total rope length is very often indicated as well, e.g., L8920. This means the rope length is 8.92 m.
Additionally, to correctly select the rope, you need to provide the following technical parameters:
- Rope diameter – measured in the middle section (e.g., 8 mm, 9 mm or 10 mm)
- Thread – diameter (e.g., M16)
- Thread – length – length of the threaded section (e.g., 14 cm)
The drawing below shows the parameters that must be provided when ordering the rope:
What is my machine's model?
- Find the nameplate on the device – it usually contains key information, such as:
- Manufacturer
- Device model
- Year of manufacture
- Serial number
- If you cannot find the nameplate and do not have the technical documentation, selecting parts based on the model may be difficult. In this situation, we recommend searching for parts by category, photos, and dimensions, which often allows you to precisely match the correct component.
Can I return or exchange the part if it doesn't fit?
If the ordered part doesn’t fit, you can return or exchange it within 30 days of the purchase date.
For the return to be accepted, the part must:
- be unused and undamaged,
- show no signs of installation,
- be sent back in its original or appropriately secured packaging.
We care about your shopping experience, so the return process is quick and hassle-free. If you have any doubts, contact us – we’ll be happy to help you choose the right part or guide you through the return process.
