Leave feedback on the product
30mm brush
Shipping costs are not included in the price.
Shipping costs are not included in the price.
Product code: M-PEDZ-0002
Share the product card
Ask about the product
The personal data controller is Graf-Art Sławomir Kulbida. We process it to respond to the inquiry. More information about the processing of personal data can be found in the privacy policy.
30 mm brush for mounting paste
A brush designed for applying tyre mounting paste to the tyre bead when working with a tyre changer. The round bristle bundle, 30 mm in diameter, allows the paste to be spread evenly across the bead profile without applying an excessive amount.
The wooden handle is approximately 16 cm long, and the total length of the brush is approximately 22 cm. This size makes it easier to guide the brush along the rim edge and reduces the need to place your hand within the working area of the tyre-mounting spoon.
Technical specifications
| Brush diameter | 30 mm |
| Handle length | approximately 16 cm |
| Overall length | approx. 22 cm |
| Handle | wooden |
Service tip: Apply the paste primarily to the tyre bead, avoiding the rim and the inside of the tyre. Too little product increases resistance as the bead passes over the rim, whilst an excess may run into the wheel and contaminate the work area.
After use, remove any remaining paste from the bristles before it dries. Hardened residue restricts the flexibility of the bristles, causing the brush to apply the product unevenly and potentially leaving dry patches on the tyre bead.
Product safety
Responsible person in the EU
Graf-Art Sławomir Kulbida
ul. Bolesława Chrobrego 38/5
59-700 Bolesławiec, Poland
Importer
Graf-Art Sławomir Kulbida
ul. Bolesława Chrobrego 38/5
59-700 Bolesławiec, Poland
Opinions
If you've added a review and it doesn't appear on the list, it may be pending moderation.
Leave feedback on the product
It pairs well
Do you need help?
Go to the blog.
Talk to our customer service team.
Monday to Friday from 9:00 AM to 3:00 PM.
Frequently Asked Questions
What cables do I need for my two-post lift?
Check the rope termination. If there are any markings on it, the total rope length is very often indicated as well, e.g., L8920. This means the rope length is 8.92 m.
Additionally, to correctly select the rope, you need to provide the following technical parameters:
- Rope diameter – measured in the middle section (e.g., 8 mm, 9 mm or 10 mm)
- Thread – diameter (e.g., M16)
- Thread – length – length of the threaded section (e.g., 14 cm)
The drawing below shows the parameters that must be provided when ordering the rope:
What is my machine's model?
- Find the nameplate on the device – it usually contains key information, such as:
- Manufacturer
- Device model
- Year of manufacture
- Serial number
- If you cannot find the nameplate and do not have the technical documentation, selecting parts based on the model may be difficult. In this situation, we recommend searching for parts by category, photos, and dimensions, which often allows you to precisely match the correct component.
Can I return or exchange the part if it doesn't fit?
If the ordered part doesn’t fit, you can return or exchange it within 30 days of the purchase date.
For the return to be accepted, the part must:
- be unused and undamaged,
- show no signs of installation,
- be sent back in its original or appropriately secured packaging.
We care about your shopping experience, so the return process is quick and hassle-free. If you have any doubts, contact us – we’ll be happy to help you choose the right part or guide you through the return process.
